Protect your home or business from costly water damage by placing a Sonin Water Alarm with Remote Sensor anywhere there is a potential for a leak.
New! Dual Remote Sensors will expand the area of coverage to detect the presence of water by placing 2 sensors up to 12 feet from each other
Detects water and sounds loud 85 dB alarm
Sensors can be placed up to 12 feet apart
New! Sensors have both suction cups and adhesive to secure in place
New! Includes wall mounting hardware
New! Install battery easily with slide and snap cover
New! Space saving design
Circuit test/reset button ensures system is working
Low battery signal tells user when it's time to replace the battery
Warns of leaks and overflows in bath, kitchen, laundry, attic, basement, or anywhere there is a potential for leaks to occur.
Alerts user within hearing range that water has reached desired level when used to monitor the filling of pools, tubs, sinks, aquariums and more
An ideal backup system for sump and bilge pumps in residential, commercial and marine applications
For leak detection:
Just place the sensor at the lowest point of the floor or other horizontal surface where water collects. New adhesive tape makes it easy to apply sensor to any smooth vertical surface. The alarm will sound if water bridges between the two contacts. Alarm can be table, shelf, or wall mounted away from the sensor.
For unattended filling of bathtubs, pools, spas, etc:
Sensor has suction cup and adhesive; use either to attach the sensor to any vertical surface. The buzzer will sound when the water reaches both metal contacts on the sensor
Posted by Paul C. on 5th Apr 2018
The sensor on the devise is not directly on the floor like your older model.I get a stream of water that is slightly lower than the units sensor on the newer model.The water stream flows across the flow even at that level. So I have to somehow angle the sensor so it contacts the water stream. Even despite that: it is a good preforming devise. It has good sensitivity. Thanks PC.